BIRD

Bird Internet Routing Daemon. Senaste version: 1.5.0 (22.4.2015)

Installation

sudo apt-get update && sudo apt-get install bird 
sudo dnf install bird

Konfiguration

Ubuntu

Enable IPv4 and IPv6 Forwarding:

echo "net.ipv4.conf.all.forwarding=1" | sudo tee -a /etc/sysctl.conf 
echo "net.ipv4.conf.default.forwarding=1" | sudo tee -a /etc/sysctl.conf 
sed 's/#net.ipv6.conf.all.forwarding=1/net.ipv6.conf.all.forwarding=1/g' /etc/sysctl.conf | sudo tee /etc/sysctl.conf 
echo "net.ipv6.conf.default.forwarding=1" | sudo tee -a /etc/sysctl.conf 
sudo sysctl -p 

Backup the configuration files:

sudo cp /etc/bird/bird.conf /etc/bird/bird.conf.original 
sudo cp /etc/bird/bird6.conf /etc/bird/bird6.conf.original 

Create the configuration files:

sudo nano /etc/bird/bird.conf 
sudo nano /etc/bird/bird6.conf 

Restart the daemons:

sudo service bird restart 
sudo service bird6 restart 

Fedora

Backup

sudo cp /etc/bird.conf /etc/bird.conf.original

Edit

sudo nano /etc/bird.conf

Restart

sudo systemctl restart bird

CLI

Gå till cli

sudo birdc
bird> show route

Quit

bird> exit

OSPF

show ospf interface 
show ospf neighbors 
show ospf state 
show ospf topology

BGP

protocol bgp {
#       disabled;
        description "My BGP uplink";
        local as 65002;
        neighbor 172.22.0.90 as 65000;
#       multihop;
        hold time 240;
        startup hold time 240;
        connect retry time 120;
        keepalive time 80;      # defaults to hold time / 3
        start delay time 5;     # How long do we wait before initial connect
        error wait time 60, 300;# Minimum and maximum time we wait after an error (when consecutive
        error forget time 300;  # ... until this timeout expires)
        path metric 1;          # Prefer routes with shorter paths (like Cisco does)
        default bgp_med 0;      # MED value we use for comparison when none is defined
        default bgp_local_pref 0;       # The same for local preference
        source address 172.22.0.19;     # What local address we use for the TCP connection
#       password "secret";      # Password used for MD5 authentication
}

Birdc

show protocols all bgp1