Gå till innehållet

ISC DHCP

Category:Guider "ISC's DHCP software is the most widely used open source DHCP implementation on the Internet. The same software can be used for LAN too. It is a carrier and enterprise grade solution to your host configuration needs." - nixCraft

Se även Kea DHCP.

Installation

sudo apt-get -y install isc-dhcp-server sudo sed -i -r 's/INTERFACES=""/INTERFACES="eth0"/g' /etc/default/isc-dhcp-server

Konfiguration

sudo dd of=/etc/dhcp/dhcpd.conf << EOF # Uppsatt av:

# You must prevent the DHCP server from receiving DNS information # from clients, set the following global option (this is a security feature): ddns-update-style none;

# You need to set your domain name and name server: option domain-name "exempel.se"; option domain-name-servers 8.8.8.8, 208.67.222.222;

# Increase the lease time. The time is set in seconds: default-lease-time 7200; max-lease-time 14400;

# If this DHCP server is the official DHCP server for the local # network, the authoritative directive should be uncommented. # The authoritative directive indicate that the DHCP server # should send DHCPNAK messages to misconfigured clients. # If this is not done, clients will be unable to get a correct # IP address after changing subnets until their old lease has # expired, which could take quite a long time. authoritative;

# Use this to send dhcp log messages to a different log file (you also # have to hack syslog.conf to complete the redirection). log-facility local7;

# No service will be given on this subnet, but declaring it helps the # DHCP server to understand the network topology. subnet 10.0.100.0 netmask 255.255.255.0 { }

#Ranges subnet 10.0.1.0 netmask 255.255.255.0 { range 10.0.1.100 10.0.1.200; option subnet-mask 255.255.255.0; option broadcast-address 10.0.1.255; option routers 10.0.1.1; }

subnet 10.0.2.0 netmask 255.255.255.0 { range 10.0.2.100 10.0.2.200; option subnet-mask 255.255.255.0; option broadcast-address 10.0.2.255; option routers 10.0.2.1; }

## Slut EOF

Testa

sudo dhcpd -t /etc/dhcp/dhcpd.conf